Conference Rooms 226 & 227 IMP Stations
IMP Station (Conf Rms 226 and 227)
Description: The IMP Station contains the following equipment:
- One (1) manual projection screen
- One (1) Benq MX812ST (Manual) short-throw ceiling-mounted, remote controlled, multimedia projector
- One (1) Panasonic DMP-BD87P-K Blu-Ray video player with remote.
- Will play BD-Video supporting the region code "A".
- Will play DVD-Video discs supporting region codes "1" or "ALL".
- CANNOT play DVD-RAM, Super Audio CD, Photo CD, DVD-Audio, Video CD and Super Video CD, WMA discs, all types DivX discs, HD DVD, BD-Video recorded at rate of 50 fields/sec.
- Ceiling-mounted speaker with 35 Watt (Atlas Sound AA35) sound amplifier
- One (1) computer / laptop VGA + Audio connection
- One (1) stereo auxiliary audio input (for smart phones, iPads, etc.)
Setup Considerations:
Troubleshooting: Projector must be powered on for sound from ceiling speakers. See table below.
| To use this: |
Projector source: |
Volume: |
Troubleshooting: |
| Laptop / Computer |
COMPUTER 1 input |
Knob #1 |
No image
- Is the projector powered ON?
- Is the projector’s video source on COMPUTER 1?
- Is the VGA cable securely connected to the rack’s VGA input & the computer’s VGA output?
- Has the projector remote’s BLANK button been pressed?
- Have computer’s VGA outputs been toggled by pressing either function (FN)+F5 or FN+F6?
No sound
- Is the amplifier powered ON?
- Is the projector powered ON?
- Is the VOLUME KNOB #1 turned up?
- Is the computer playing a sound?
- Is the computer playing a sound?
- Is the computer’s volume turned up?
- Is the computer’s audio cable securely plugged into the computer’s headphone jack and the 1/8” stereo jack on the side of the rack?
|
| DVD / Blu-Ray player |
HDMI input |
Knob #1 |
No image
- Is the projector powered ON?
- Is the projector’s video source on HDMI?
- Is the DVD/Blu-Ray player playing a video?
- Has the projector remote’s BLANK button been pressed?
No sound
- Is the amplifier powered ON?
- Is the projector powered ON?
- Is the VOLUME KNOB #1 turned up?
- Is the DVD/Blu-Ray player playing a sound?
|
| Auxiliary Audio (Smartphone, iPod, iPhone, iPad, etc.) |
Not used |
Knob #3 |
No image
No sound
- Is the amplifier powered ON?
- Is the VOLUME KNOB #3 turned up?
- Is the device playing a sound?
- Is the device’s volume turned up?
- Is an audio cable securely plugged into the device’s headphone jack and the RCA stereo jacks on the side of the rack?
|
